The Germinator Closing wheel is an innovative and modern closing wheel that has replaced the traditional and outdated rubber wheels. The Germinator closing wheel is useful in promoting the successful and consistent germination as well as the emergence of the seed. It is made out of premium-grade steel which is helpful in reducing the risk of sidewall compaction as well as lowers the down pressure.
The Grain Temp Guard Humidity-Temperature system is ideal for monitoring higher moisture grains or grain you are conditioning. Track grain conditioning with the humidity reading and data charts from our resources page. High and low temp/humidity warnings with audible and visual alarm sounds detect changes in target temperature/humidity.
Farm innovation is a never-ending process with all the demands to get planting and harvest done in the most cost-effective, safe and productive way. At Farm Shop® we are excited to offer our cutting-edge product, the Germinator® for your planting needs! Keep your hard work safe with Grain Temp Guard® and our newest product, End Zone.
Farm Shop MFG, LLC manufactures agriculture equipment to make farming easy, safe, convenient, and profitable for the farmers. We are the Original Equipment Manufacturer (OEM) who always focus on producing the most efficient and cost effective farming equipment for the farmers that can help them from the stage of planting the seed to the final stage of storing the harvested yield.
Our products are engineered to enhance the farm yield while reducing the risk of loss. Therefore, our range of agriculture equipment and agricultural machinery is manufactured from high quality and durable materials.
The range of Germinator products is devised for better germination and emergence of seeds with consistency while eliminating all the irregularities and unfavorable conditions. Whereas, the Grain Temp Guard products are engineered to make the farmers free from the stress of maintaining the right temperature and moisture content in the grain. The Alarm DT/ HT can trigger the alarm while displaying the temperature and humidity levels. Similarly, the EndZone Fan Controls manages the operation of the fan between the two set parameters of high and low-temperature points.
At Farm Shop MFG, LLC, we do the research and initiate towards developing innovative and technology-based agriculture equipment and devices that are highly useful for farmers and help in increasing production every year. Our advanced technology products have successfully managed to replace the old, outdated, and traditional agricultural machinery and methods of farming. We use modern technology in all our products.
Germinator®, it’s not just any closing wheel…
Spring of 2021, my sons and I decided to purchase spiked closing wheels for two of our three 24 row planters. After researching, my interest was in the performance generated by Farm Shop MFG®’s Germinator® steel closing wheel. The reviews of its inner-shoulder maximizing seed-soil-contact looked to make it the best performer. The 50 grade steel construction’s longevity also added value (after 4,500 acres, they still look new!).
My sons, following some research that they had read, wanted to get Yetter Twisters. We outfitted 23 rows on my planter with Germinator® closing wheels and one row of Twisters and 23 rows of Twisters on my sons planter with one row of Germinators. As we started out, aside from the “firm seed zone” generated by the Germinator®, we thought the results were similar. As crops started to emerge, we all fell into agreement; the Germinators were edging out the Twisters with performance by it’s “inner-shoulder-firmer”! I’m glad I didn’t let my boys talk me out of Germinator® closing wheels on my planter!
My planter has never worked well on soybeans. I’ll definitely be using the Germinator wheels again and will be telling everyone I know.
After hearing about the Germinator closing wheels on a radio ad, I decided to give them a try. I realized that for the 48 years I’d farmed, I was usually disappointed with the job my various closing systems had done. This year, I was very impressed with their performance in a variety of soil conditional.
I just finished corn. No issues with the Germinator wheels whatsoever. Great seed furrow closing action in both no-till and conventional till. Thanks for making such a great product.
The Grain Temp Guards® that I have, I put on a couple of my smaller bins. It is a more cost-effective way of maintaining the temperature of my soybeans. I have the Alarm HT which tells me the temperature and humidity. It comes with a nice chart to tell me where the grain moisture level is at. This has really worked well for me this year. How this Alarm HT works for me is simple and straightforward. I put in the parameters on where I want the temperature and humidity. The Alarm HT would tell me if the grain got too high or too low depending on what I was trying to do. This year I was trying to dry the grain down and maintain it. When the weather warmed up the Alarm HT monitored the temperature so my fans did not run unnecessarily. Also if there were times of the year where it did spike a little bit, the Alarm HT was able to quickly notify me of the problem. Having a little more information really helped us understand and see the patterns. When the humidity gets higher and the temperature goes up we can almost know which fan was going to need to be turned on. It’s for your own information, you’re not just trusting; you learn a little bit more about maintaining the grain. I do anticipate putting Grain Temp Guards® on all my bins. I don’t think I would want to go back to not having them. It’s just the peace of mind that I’m maintaining my grain properly, especially when you’re considering moisture discounts and spoilage problems when selling grain.
Grain Temp Guards® seem very effective and I’ve looked at other systems, the price points are not justifiable with smaller bins. This is a good way to take advantage of the same technology with a better price point.
This is the first year that we did not have a spoilage issue coming into the spring season due to using the Grain Temp Guards®. We have been able to monitor what was going on in the bins before it actually went bad. Being able to watch the temperature and humidity in the bins, we were able to harvest and put our grain into the bins wetter than what we were doing blindly before…. I felt more comfortable being able to watch what was going on. I know some guys who have other versions but dollar wise Grain Temp Guard® seems to be the more doable for a multi-bin situation.
I have the Farm Shop, Grain Temp Guard alarm HT and I religiously check them weekly. It will tell you right away if the temp is going up, or the humidity is changing(moisture migration) and you need to run the fans. I’ve been doing this for 40 years and as you get older it gets harder to climb the bins. With the Grain Temp Guard system, I can stand on the ground, read what is going on! I don’t have to worry about frost, ice, rain; I can stand on the ground, read the monitor, it tells you what is going on and you do what you have to do!
Roger T., Iowa
Pretty pleased with these Germinator Closing Wheels. They put those copperhead inserts to shame. That’s a fact!
I’m 600 acres into planting, both no-till and some worked. I absolutely love the closing wheels! I should have done this years ago! Depth band is the key. I’ve fought other closing wheels in the past running too deep in light sandy soil and popping the seed out. I don’t have that issue with these.
In 2019, I knew I needed a higher performance closing wheel, but which one? I purchased Yetter Twisters, Copperhead Furrow Cruisers and Germinator® steel closing wheels by Farm Shop MFG. We put them on the planter both as singles & paired and compared the results. In all conditions the Germinator® performed with exceptional results. Under some conditions the competitors did little more than poke holes in the dirt. The traditional rubber wheel consistently showed the poorest outcomes. After one season’s use, the poly wheels (plastic) inserts used by the competitors showed noticeable wear, but you can tell the Germinator® with its 50 grade steel construction, is going to be on the planter for a long time. March 2020, I purchased 39 more wheels to complete all my row units. I tested and I’m going with Germinator®!
Daniel G., Rich Hill, MO
I added Germinator closing wheels to my planter in the spring of 2019. My agronomy company scouts my fields and many others in the surrounding communities, paid me an incredible complement. Not knowing what I had done differently, he said, “of all the fields he scouted through his territory in central Minnesota, mine were the only ones with the consistent even germination and contained the best stand”. My first indication of how great that expenditure would turn out to be.
Grain guard takes the guess work out of storing your grain. With an easy to read display, you can make management decisions quickly and effectively.
Spring 2019 was as frustrating in Rich Hill, Missouri as in many parts of the Midwest. Too many rainy days and not enough sunny days! After struggling through April and May and continuing to have problems, one being our inability to close the seed furrow in all the variable soil conditions we were encountering (mostly WET). Our neighbor bought some Germinator Closing Wheels earlier in the season and was getting results that were much more successful than ours. After seeing his results I parked our two planters and jumped in the pickup and drove to Iowa purchasing 128 Germinator Closing Wheels for our two planters. My initial reaction to the results was quite positive, but as they say, “the proof is in the pudding”; after seeing our harvest results, I am an enthusiastic supporter of the Farm Shop MFG Germinator Closing Wheel! That day I drove up to Iowa was well worth my time.
I feel fortunate to have had Germinator closing wheels on my planter in 2018. Here in Northwest Iowa it was extremely difficult spring with frequent rain delays and the complication of occasionally needing to plant on stale tillage. The Germinator closing wheels system worked great in normal conditions, wet spots and where crusts had developed on stale tillage due to the frequent rain showers. In every case our germination rate and stand was better than expected! When digging behind the planter we always found the total destruction of the furrow sidewall and ideal seed to soil contact.
These wheels are a welcome OEM product replacement on my planter, it will be a fun planting season knowing the wheels will remain clog-free and produce better results at the same time.
Most seed companies guarantee a 95% germination rate. When using the Germinator, expect better.